ser2net-plars

This daemon allows telnet and tcp sessions to be established with a
host's serial ports. Combined with a terminal emulator, this can be a
very simple means to configure network devices or other equipment with
a serial port. This is remarkably similar to the reverse telnet
feature of some Cisco routers.

You will need to connect the raw-usb interface using:

 $ sudo snap connect ser2net-plars:raw-usb

*note: If you are on classic and don't have a gadget with support for

    the serial-port interface, you should install with --classic

Example usage:

 $ ser2net-plars.config-get > ser2net.yaml

   <edit the config>

 $ cat /tmp/ser2net.yaml |sudo /snap/bin/ser2net-plars.config-set

 $ sudo snap restart ser2net-plars.ser2net